GM Service Manual Online
For 1990-2009 cars only

    Object Number: 1306287  Size: SH
  1. Ensure that the camshaft sealing rings (1) are in place in the camshaft grooves. Camshaft sealing rings must be in place below the surface of the camshaft journal in order to avoid being pinched between the cylinder head and the camshaft caps.

  2. Object Number: 1306309  Size: SH
  3. Apply a liberal amount of lubricant GM P/N 12345501 (Canadian P/N 992704) or equivalent to the camshaft journals and the right cylinder head camshaft carriers.

  4. Object Number: 946242  Size: SH
  5. Place the right intake and right exhaust camshafts in position in the right cylinder head.

  6. Object Number: 1306310  Size: SH
  7. Position the camshaft lobes in a neutral position with the flats on the back of the camshafts up and parallel (1) with the right cylinder head camshaft cover rail.

  8. Object Number: 1306311  Size: SH
  9. Observe the markings on the right cylinder head camshaft bearing caps. Each bearing cap is marked in order to identify its location. The markings have the following meanings:
  10. • The raised feature must always be oriented toward the center of the cylinder head.
    • The I indicates the intake camshaft.
    • The E indicates the exhaust camshaft.
    • The number 1, 3, 5 indicates the cylinder position from the front of the engine.
  11. Apply a liberal amount of lubricant GM P/N 12345501 (Canadian P/N 992704) or equivalent to the camshaft bearing caps.

  12. Object Number: 946234  Size: SH
  13. Install the camshaft bearing thrust caps in the first journal of the right cylinder head.
  14. Install the remaining bearing caps with their orientation mark toward the center of the cylinder head.
  15. Hand start all the camshaft bearing cap bolts.
  16. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1306312  Size: SH
  17. Tighten the camshaft bearing cap bolts in the sequence shown to 10 N·m (89 lb in).
  18. Loosen the center intake camshaft bearing cap bolts (1, 2) and the center exhaust camshaft bearing cap bolts (3, 4).
  19. Retighten the center camshaft bearing cap bolts (1, 2, 3, 4) to 10 N·m (89 lb in).