GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2009
🢒
SRX
🢒
Engine
🢒
Engine Mechanical - 4.6L (LH2)
🢒 Engine Flywheel Replacement
Special Tools
J 45059
Torque Angle Meter
Removal Procedure
Remove the transmission assembly. Refer to
Transmission Replacement
or
Transmission Replacement
.
Use a Snap-On™ A144A Flywheel Turner, or equivalent to prevent the engine from rotating.
Remove the engine flywheel bolts.
Clean and inspect the flywheel. Refer to
Engine Flywheel Cleaning and Inspection
Installation Procedure
Install the engine flywheel.
Apply sealant to the engine flywheel bolts. Refer to
Adhesives, Fluids, Lubricants, and Sealers
for the correct part number.
Install the engine flywheel bolts finger tight.
Use a Snap-On™ A144A Flywheel Turner, or equivalent to prevent the engine from rotating.
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten the engine flywheel bolts.
Tighten
First Pass - Tighten the flywheel bolts to 30 N·m (22 lb ft).
Final Pass - Tighten the flywheel bolts an additional 50 degrees using the
J 45059
.
Install the transmission assembly. Refer to
Transmission Replacement
or
Transmission Replacement
.