GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Intake Manifold Runner Control Solenoid Replacement

Removal Procedure

    Object Number: 1285195 Size: SH

    Note: DO NOT separate the upper intake manifold from the lower intake manifold.

  1. Remove the upper intake manifold with the lower intake manifold. Refer to Lower Intake Manifold Replacement.
  2. Remove the intake manifold runner control solenoid bolts.
  3. Remove the intake manifold runner control solenoid.

Installation Procedure

    Object Number: 1285195 Size: SH
  1. Install the intake manifold runner control solenoid.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the intake manifold runner control solenoid bolts.

    3. Tighten
    Tighten the intake manifold runner control solenoid bolts to 10 N·m (89 lb in).

  3. Install the upper intake manifold. Refer to Lower Intake Manifold Replacement.