Removal Procedure
- Remove the negative battery cable. Refer to
Battery Negative Cable Replacement.
- Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
- Squeeze the negative battery cable branches together.
Important: Note the position of the battery current sensor prior to removal.
- Slide the battery current sensor (2) off of the negative battery cable (1).
Installation Procedure
Important: Ensure that the tape tab is pointing away from the battery prior to installation.
- Squeeze the negative battery cable branches together, while sliding the NEW battery current sensor (2) up onto the negative battery cable (1).
- Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
- Install the negative battery cable. Refer to
Battery Negative Cable Replacement.