GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement .

  2. Object Number: 1283464  Size: SH
  3. Disconnect the electrical connector on the inclination sensor (1).
  4. Remove the inclination sensor from the bracket.

Installation Procedure


    Object Number: 1283464  Size: SH
  1. Install the inclination sensor (1) to the bracket.
  2. Connect the electrical connector.
  3. Install the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement .