Television Antenna Module Replacement for Cadillac SRX 2009

1. Remove the right rear body side trim panel. Refer to Body Side Rear Trim Panel Replacement.



2. Remove the nuts (1) securing the module to the vehicle.
3. Disconnect the electrical connectors.
4. Remove the module.

1. Connect the electrical connectors.
2. Locate the module the vehicle.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the nuts (1) securing the processor to the vehicle.

Tighten
Tighten the nuts to 9 N·m (80 lb in).

4. Install the right rear body side trim panel. Refer to Body Side Rear Trim Panel Replacement.