GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Auxiliary Blower Motor Resistor Replacement

Removal Procedure

    Object Number: 1342278 Size: SH
  1. Remove the left body side trim access panel.
  2. Disconnect the electrical connector from the blower motor resistor.

    3. Object Number: 1342267 Size: SH
  3. Remove the blower motor resistor screws from the HVAC module.
  4. Remove the blower motor resistor from the vehicle.

Installation Procedure

    Object Number: 1342267 Size: SH
  1. Install the blower motor resistor.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the blower motor resistor screws.

    3. Tighten
    Tighten the screws to 1 N·m (9 lb in).


    Object Number: 1342278 Size: SH
  3. Connect the electrical connector to the blower motor resistor.
  4. Install the left body side trim access panel.