GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Mode Valve Actuator Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement.

    2. Object Number: 1378961 Size: SH
  2. Disconnect the mode actuator electrical connector.

    3. Object Number: 1378965 Size: SH
  3. Remove the mode actuator screws.
  4. Remove the mode actuator.

Installation Procedure

    Object Number: 1378965 Size: SH
  1. If replacing the mode actuator, transfer the lever from the old actuator to the new actuator.
  2. Install the mode actuator.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the mode actuator screws.

    4. Tighten
    Tighten the screws to 1 N·m (9 lb in).


    Object Number: 1378961 Size: SH
  4. Connect the electrical connector to the actuator.
  5. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement.