GM Service Manual Online
For 1990-2009 cars only

Parking Brake Indicator Switch Replacement RHD

Removal Procedure


    Object Number: 658944  Size: SH
  1. Remove the right sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side.
  2. Disconnect the electrical connector from the park brake warning lamp switch.
  3. Remove the park brake warning lamp switch retaining bolt.
  4. Remove the park brake warning lamp switch.

Installation Procedure


    Object Number: 658944  Size: SH
  1. Install the park brake warning lamp switch to the park brake lever assembly. Align the locator pin to the locator hole.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the park brake switch retaining bolt.
  4. Tighten
    Tighten the bolt to 2 N·m (18 lb in).

  5. Connect the park brake warning lamp electrical connector to the park brake warning lamp switch.
  6. Install the right sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side.

Parking Brake Indicator Switch Replacement LHD

Removal Procedure


    Object Number: 658944  Size: SH
  1. Remove the left sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
  2. Disconnect the electrical connector from the park brake warning lamp switch.
  3. Remove the park brake warning lamp switch retaining bolt.
  4. Remove the park brake warning lamp switch.

Installation Procedure


    Object Number: 658944  Size: SH
  1. Install the park brake warning lamp switch to the park brake lever assembly. Align the locator pin to the locator hole.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the park brake switch retaining bolt.
  4. Tighten
    Tighten the bolt to 2 N·m (18 lb in).

  5. Connect the park brake warning lamp electrical connector to the park brake warning lamp switch.
  6. Install the left sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.