For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
- Disconnect the front ride sensor link from the upper control arm ball stud.
- Disconnect the front ride sensor harness connector.
- Loosen the front ride sensor retaining nut.
- Gently tap the front ride sensor retaining stud in order to loosen the stud to fender connection.
- Remove the front ride sender from the vehicle.
Installation Procedure
- Position the sensor to the vehicle.
- Install the front ride sensor retaining nut and tighten to 9 N·m (80 lb in).
- Connect the front ride sensor link to the upper control arm ball stud.
- Connect the front ride sensor harness connector.
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
