Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove either the left front or right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove either the left front or right front fascia extension. Refer to Front Bumper Fascia Extension Replacement - Right Side and Front Bumper Fascia Extension Replacement - Left Side.
4. Disconnect the forward lamp harness from the electrical cover connector.

1

Daytime Running Lamp Bracket Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Daytime Running Lamp Assembly

Tip
Pull rearward in order to remove the lamp assembly from the bracket.