GM Service Manual Online
For 1990-2009 cars only

Draining Procedure


    Object Number: 912464  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Clean any dirt from around the differential drain plug.
  3. Position a drain pan under drain plug.
  4. Remove the drain plug from the differential and drain the fluid.

Filling Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 912464  Size: SH
  1. Install the drain plug to the differential and tighten to 39 N·m (29 lb ft).

  2. Object Number: 912461  Size: SH
  3. Clean any dirt from around the differential fill plug.
  4. Remove the fill plug from the differential.
  5. Fill the differential with 75W90 synthetic axle lubricant , GM P/N 12378261 (Canadian P/N 10953455) or equivalent. Refer to Approximate Fluid Capacities.
  6. Inspect the gear lubricant level to ensure it is even with the bottom of the fill plug hole to no lower than 6 mm (0.25 in) below the opening.
  7. Install the fill plug to the differential and tighten to 39 N·m (29 lb ft).
  8. Lower the vehicle.