Tools Required

J 22912-B Split-Plate Bearing Puller

1. Remove the 10 ring gear bolts (1) and the ring gear (3) from the differential carrier (2) using a punch and a hammer through the bolt hole.

Note: Differential gears are preloaded and cannot be disassembled or assembled in the field.




2. Using the J 22912-B and a press, remove the left side bearing. It may be necessary to cut the cage and remove the rollers so the tool will grip the race.



3. Using the J 22912-B and a press, remove the right side bearing. It may be necessary to cut the cage and remove the rollers so the tool will grip the race.