GM Service Manual Online
For 1990-2009 cars only

    Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

    Warning: Refer to Express Window Down Warning in the Preface section.


    Object Number: 758771  Size: SH
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement.
  2. Pull down the upper portion of the water deflector far enough to access the window clamp nuts. Refer to Front Side Door Water Deflector Replacement or Rear Side Door Water Deflector Replacement.
  3. Loosen the window regulator to window clamp nuts 4 revolutions.
  4. Connect the door trim panel wire connector.
  5. Note: Start the vehicle to ensure maximum power to the window motor. This is required in order to fully seat the window for adjustment.

  6. Start the vehicle.
  7. Caution: Refer to Fastener Caution in the Preface section.

  8. Using the power window switch, raise the window to the full up position.
  9. Tighten
    Tighten the window clamp nuts to 11 N·m (98 lb in).

  10. Inspect for proper window operation and a tight seal.
  11. Shut off the vehicle.
  12. Install the water deflector. Refer to Front Side Door Water Deflector Replacement or Rear Side Door Water Deflector Replacement.
  13. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement.