Removal Procedure
- Open the liftgate.
- Remove the liftgate applique. Refer to
Liftgate Applique Replacement.
- Remove the license lamp (1) from the liftgate applique by lifting the retaining tabs and sliding the lamp away from the applique.
- Remove the license lamp socket from the lamp assembly by turning it counterclockwise.
- Remove the license lamp bulb from the socket if replacing.
Installation Procedure
- Install the license lamp bulb into the socket if replacing.
- Install the license lamp socket into the lamp assembly by inserting the socket and turning the socket clockwise.
- Install the license lamp (1) to the liftgate applique by sliding the lamp into the applique until an audible click is heard.
- Install the liftgate applique to the rear compartment lid. Refer to
Liftgate Applique Replacement.
- Close the lift gate.