GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement.

  2. Object Number: 893609  Size: SH
  3. Use a grease pencil to mark the liftgate latch striker position.
  4. Remove the bolts securing the liftgate latch striker to the vehicle.
  5. Remove the liftgate latch striker and the gasket from the vehicle.

Installation Procedure


    Object Number: 893609  Size: SH
  1. Position the liftgate latch striker and the gasket to the vehicle.
  2. Install the bolts that secure the liftgate latch striker to the vehicle.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Adjust the liftgate latch striker as necessary.
  5. Tighten
    Tighten the latch striker bolts to 25 N·m (20 lb ft).

  6. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement.