GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Body Systems 🢒 Wipers and Washers 🢒 Headlamp Washer Nozzle Replacement

Removal Procedure

    Object Number: 1233332 Size: SH
  1. Remove the upper fascia/grille to tie bar push pins.
  2. Remove the washer to fascia retaining screw.

    3. Object Number: 1233325 Size: SH
  3. Squeeze the locking tabs on the washer body to release the washer from the fascia.
  4. Pull the nozzle shaft out. Lock the nozzle shaft extended in place with the washer body locking tabs.

    5. Object Number: 1233322 Size: SH
  5. Use a small flat-bladed too to release the trim cover from the headlamp washer nozzle.
  6. Disconnect the fluid line. Remove the washer from the vehicle.

Installation Procedure
  1. Lock the washer nozzle shaft extended. Position the washer nozzle shaft through the opening in the fascia.

    2. Object Number: 1233322 Size: SH
  2. Install the trim cover to the nozzle shaft.

    3. Object Number: 1233325 Size: SH
  3. Install the washer body locking tabs to the fascia.
  4. Connect the fluid line.
  5. Install the washer to the fascia with a retaining screw.

    6. Object Number: 1233332 Size: SH
  6. Install the fascia/grille to the tie bar push pins