Removal Procedure
- Remove the air deflector. Refer to
Front Air Deflector Replacement.
- Disconnect the washer hose from the washer pump.
- Drain the washer solvent into a suitable container.
- Remove the hood insulator. Refer to
Hood Insulator Replacement.
- Remove the passenger side air inlet grille. Refer to
Air Inlet Grille Panel Replacement.
- Disconnect the washer hose retainer clip (1) from the inside of the hood hinge.
- Disconnect the washer hose connections (3,6) from the washer nozzles.
- Remove the washer hose from the passenger side inner fender.
- Remove the hose rearward from the passenger side hood hinge.
- Remove the washer hose from the vehicle.
Installation Procedure
- Position the washer hose around the passenger side hood hinge (1).
- Route the hose (washer pump end first) forward behind the bracket securing the inner fender to the wheelhouse.
- Route the hose (4) downward to the washer solvent container.
- Secure the washer hose retainer (1) to the inside edge of the hood hinge.
- Connect the washer hose connections (2) to the washer nozzles.
- Install the air inlet grille (1). Refer to
Air Inlet Grille Panel Replacement.
- Install the hood insulator. Refer to
Hood Insulator Replacement.
- Connect the washer hose to the washer pump.
- Install the air deflector. Refer to
Front Air Deflector Replacement.
- Fill the washer solvent container.
- Verify washer operation.