Diagnostic Instructions
DTC Descriptors
DTC P0711: Transmission Fluid Temperature (TFT) Sensor Performance
Circuit/System Description
The transmission fluid temperature (TFT) sensor is located inside of the transmission control module (TCM) assembly and has no serviceable parts. The TFT sensor provides transmission fluid temperature to the TCM. This fault is handled inside
the TCM and no external circuits are involved.
Conditions for Running the DTC
Condition 1
• | No DTCs P0711, P0716, P0717, P0722, or P0723. |
• | DTC P0711 not passed this key ON. |
• | Ignition voltage is between 8.6-18.0 volts. |
• | The engine coolant temperature (ECT) is valid. |
• | The TCM internal temperature is -49°C to +169°C (-56°F and +336°F). |
• | The engine speed is 500-7500 RPM for at least 5 seconds. |
• | The vehicle speed is greater than 8 km/h (5 mph) for 300 seconds cumulative. |
• | TCC slip speed is greater than 120 RPM for 300 seconds cumulative. |
• | The TFT is between -40°C and +21°C (-40°F and +70°F). |
• | The TFT has changed by less than 2.0°C (3.6°F) in 100 seconds. |
• | The ECT is greater than 70°C (158°F). |
• | The ECT has increased by 55°C (99°F) since startup. |
• | The TCM TFT sensor is between -50°C and +169°C (-58°F and +336°F) at start up. |
Condition 2
• | No DTCs P0711, P0716, P0717, P0722, or P0723. |
• | DTC P0711 not passed this key ON. |
• | Ignition voltage is between 8.6-18.0 volts. |
• | The TCM internal temperature is -49°C to +169°C (-56°F and +336°F). |
• | The engine speed is 500-7500 RPM for at least 5 seconds. |
• | The vehicle speed is greater than 8 km/h (5 mph) for 300 seconds cumulative. |
• | The ECT is greater than 70°C (158°F). |
• | The ECT has increased by 55°C (99°F) since startup. |
• | The TCM TFT sensor is between 129-170°C (264-338°F) at start up. |
Condition 3
• | Ignition voltage is between 8.6-18.0 volts. |
• | The engine speed is 500-7500 RPM for at least 5 seconds. |
Condition 4
• | No DTCs P0711, P0716, P0717, P0722, or P0723. |
• | DTC P0711 not passed this key ON. |
• | Ignition voltage is between 8.6-18.0 volts. |
• | The ECT is between -39°C and +149°C (-36°F and +300°F). |
• | The TCM internal temperature is -49°C to +169°C (-56°F and +336°F). |
• | Accelerator pedal position signal is valid. |
• | Accelerator pedal position is between 8-100 percent. |
• | The engine speed is 500-7500 RPM for at least 5 seconds. |
• | The TCM must receive a valid torque signal from the ECM. |
• | Engine torque is between 50-1492 N·m (36-1100 lb ft). |
• | Vehicle speed is between 8-511 km/h (5-317 mph). |
• | No transmission shift default actions active. |
Conditions for Setting the DTC
Condition 1
• | Vehicle speed is greater than 8 km/h (5 mph) for 300 seconds cumulative. |
• | TCC slip speed is greater than 120 RPM for 300 seconds cumulative. |
• | The TFT is between -50°C and +21°C (-58°F and +70°F). |
• | The TFT has changed by less than 2.0°C (3.6°F) in 100 seconds. |
• | The ECT is greater than 70°C (158°F). |
• | The ECT has increased by 55°C (99°F) since startup. |
Condition 2
• | Vehicle speed is greater than 8 km/h (5 mph) for 300 seconds cumulative. |
• | TCC slip speed is greater than 120 RPM for 300 seconds cumulative. |
• | The TFT is between 129-170°C (264-507°F). |
• | The TFT has changed by less than 2.0°C (3.6°F) in 100 seconds. |
• | The ECT is greater than 70°C (158°F). |
• | The ECT has increased by 55°C (99°F) since startup. |
Condition 3
The TFT power up temperature changes by greater than or equal to 20°C (36°F) 14 times over 7 seconds.
Condition 4
The TFT has not changed more than 20°C (36°F) during the following conditions:
• | The TFT temperature at start up is -50°C (-58°F) for 2500 seconds (41.6 minutes). |
• | The TFT temperature at start up is -25°C (-13°F) for 1000 seconds (16.6 minutes). |
• | The TFT temperature at start up is -10°C (14°F) for 800 seconds (13.3 minutes). |
• | The TFT temperature at start up is -5°C (23°F) for 520 seconds (8.6 minutes). |
• | The TFT temperature at start up is 20°C (68°F) for 200 seconds (3.3 minutes). |
Action Taken When the DTC Sets
• | DTC P0711 is a Type C DTC. |
• | The TCM freezes transmission adaptive functions. |
• | The TCM allows the vehicle to operate in transmission protection mode. |
Conditions for Clearing the DTC
DTC P0711 is a Type C DTC.
Reference Information
Description and Operation
Electronic Component Description
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions
Circuit/System Verification
- Start the engine and operate the vehicle at 64 km/h (40 mph) while observing the TCM start up temperature sensor and the TFT sensor.
- The system is operating normally if the TCM start up temperature is within 10°C (18°F) of the TFT temperature.
Circuit/System Testing
Clear the DTC and operate the vehicle under the conditions for running and setting the DTC. Verify that the DTC does not reset.
⇒ | If the DTC resets, replace the control solenoid (w/body and TCM) valve assembly. |
Component Testing
Perform the
Control Solenoid Valve and Transmission Control Module Assembly Inspection
.
Repair Instructions
Perform the
Diagnostic Repair Verification
after completing the diagnostic procedure.
• | Control solenoid (w/body and TCM) valve assembly replacement. Refer to
Control Module References
for replacement, setup, and programming. |