GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Release Handle Assembly Replacement

Removal Procedure
  1. Remove the knee bolster. Refer to Knee Bolster Replacement.

    2. Object Number: 786887 Size: SH
  2. Remove the park brake release handle mounting screws.
  3. Remove the park brake release cable housing (3) from the park brake release handle assembly (1).
  4. Remove the park brake release handle (2) from the park brake release cable (1).
  5. Remove the park brake release handle from the vehicle.

Installation Procedure

    Object Number: 786887 Size: SH
  1. Install the park brake release handle (2) to the park brake release cable (1).
  2. Install the park brake release cable housing (3) to the park brake release handle assembly (1).
  3. Install the park brake release handle assembly (1) to the knee bolster.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the park brake release handle mounting screws.

    5. Tighten
    Tighten the park brake release handle mounting screws to 2 N·m (18 lb in).

  5. Install the knee bolster. Refer to Knee Bolster Replacement.