Special Tools

1. Remove the transmission torque converter. Refer to Torque Converter Replacement.



2. Remove and discard the torque converter seal bolts.
3. Remove the torque converter seal using J 45000 .

1. Assemble J 8092 onto J 44766 .
2. Install the torque converter seal onto the tool before installing into the case to prevent damage to the seal.

Note: Align the torque converter seal with the bolt holes.

3. Install the torque converter seal into the torque converter housing.

Caution: Refer to Fastener Caution in the Preface section.

4. Install the torque converter seal bolts and tighten to 3.6 N·m (32 lb in).
5. Install the transmission torque converter. Refer to Torque Converter Replacement.