GM Service Manual Online
For 1990-2009 cars only

Transmission Fluid Pan, Filter and Electrical Connector Passage Sleeve Removal 6L50


Object Number: 1696418  Size: LF

Callout

Component Name

1

Bolt M6 x 20 (Qty: 17)

2

Fluid Pan Assembly

3

Fluid Pan Gasket

Tip
The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused. If the gasket is stuck to the case or pan, it should be replaced.

4

Fluid Filter Assembly

Caution: Pull the fluid filter assembly straight out to avoid damage. Do not bend or twist the filter neck.

5

Fluid Filter Seal Assembly

Caution: Do not damage the case sealing surface when removing the filter seal assembly.

Tip
Use a screwdriver or snap ring pliers.

6

Electrical Connector Slide Lock

Caution: Pull up on the electrical connector slide lock to avoid damage to the connector.

7

Electrical Connector Passage Sleeve

Tip
Engage DT 47715 connector passage sleeve remover/installer on sleeve and pull straight out.

Special Tools

    • DT 47715 Electrical Connector Passage Sleeve Remover/Installer
    • J 42183 Driver Handle

For equivalent regional tools, refer to Special Tools.