Preliminary Procedures

1. Install the 1-2-3-4 and 3-5 reverse clutch housing with the 1-2-3-4 and 3-5 reverse clutch plates installed, onto the torque converter housing.
2. Install the DT 47868-2 magnetic base adapter onto the torque converter housing.
3. Install DT 47868-1 clutch pack travel weight and DT 47868-3 clutch travel weight adapter (6L50 applications only) onto the 3-5 reverse clutch backing plate.
4. Install the J 26900-13 magnetic base onto DT 47868-2 magnetic base adapter .
5. Attach the J 8001 dial indicator set to the J 26900-13 magnetic base and zero out the dial indicator on the DT 47868-1 clutch pack travel weight .

Special Tools

For equivalent regional tools, refer to Special Tools.

1

3-5 Reverse Clutch Apply Passage

Tip
Apply compressed air to the apply passage hole, and observe the dial indicator measurement. Refer to Clutch Backing Plate Retaining Ring Specifications.