GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Liftgate Close Actuator Motor Control Module Replacement

Object Number: 1824896 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the body side trim panel. Refer to Body Side Rear Trim Panel Replacement.
  2. Disconnect the power liftgate actuator rod. Refer to Liftgate Actuator Rod Replacement.

1

Liftgate Close Actuator Motor Control Module Bolt (Qty: 5)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

    • Disconnect the electrical connector.
    • Cut the tie strap, if equipped.

Tighten
9 N·m (80 lb in)

2

Liftgate Close Actuator Motor Control Module

Procedure

If a replacement control module is installed, program the module. Refer to Control Module References.