GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Windshield Pillar Garnish Molding Replacement

Removal Procedure

    Object Number: 708032 Size: SH
  1. Open the door.
  2. Remove the screw cover at the top of the garnish molding.
  3. Remove the screw from the garnish molding.
  4. Pull inward on the garnish molding (2) to release the top of the molding from the headliner (3).
  5. Pull inward at the center of the garnish molding to release the center part of the garnish molding.
  6. Remove the speaker. Refer to Front Upper Speaker Replacement.

Installation Procedure
  1. Install the speaker. Refer to Front Upper Speaker Replacement.

    2. Object Number: 708032 Size: SH
  2. Position the base of the garnish molding to the outside of the instrument panel pad.
  3. Position the molding to the windshield pillar, aligning the tabs to the retention clips on the windshield pillar.
  4. Push inward on the garnish molding (2) to secure the windshield pillar and headliner.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the fastener.

    6. Tighten
    Tighten the fastener to 2 N·m (18 lb in).

  6. Install the screw cover.