Removal Procedure
Warning: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
Caution: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.
- Open and support the hood.
- Using a small flat bladed tool, release the clip retaining the hood assist rod to the lower assist rod ball stud (3).
- Using a small flat bladed tool, release the clip retaining the hood assist rod to the upper assist rod ball stud (1).
- Remove the hood assist rod (2) from the vehicle.
Installation Procedure
- Press the hood assist rod (2) onto the upper hood assist rod ball stud (1).
- Press the hood assist rod (2) onto the lower hood assist rod ball stud (3).
- Ensure that both clips are fully seated on the hood assist rod (2).
- Close the hood.