GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
  2. Tilt the steering column to the CENTER position.
  3. Disconnect any electrical connectors as needed.

  4. Object Number: 761439  Size: SH
  5. Remove the turn signal multifunction switch bolts.
  6. Remove the turn signal multifunction switch from the steering column.

Installation Procedure

  1. Install the turn signal multifunction switch to the steering column.
  2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 761439  Size: SH
  3. Install the turn signal multifunction switch bolts.
  4. Tighten

        • Tighten the top bolt to 3 N·m (27 lb in).
        • Tighten the front bolt to 7 N·m (62 lb in).
  5. Connect any electrical connectors as needed.
  6. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement.