Preliminary Procedures

1. Remove the side door opening frame garnish molding. Refer to Side Door Opening Frame Garnish Molding Replacement.
2. Remove the body side rear upper garnish molding. Refer to Body Side Rear Upper Garnish Molding Replacement.

1

Storage Bin Liner

2

Storage Bin Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

3

Storage Bin

4

Remote Control Door Lock Receiver

Procedure

1. The module slides and snaps into the storage bin.
2. Disconnect the electrical connector.
3. If a replacement module is installed, program the module. Refer to Control Module References.