GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Electronic Suspension Control Module Replacement

Removal Procedure
  1. Remove the right rear trim panel. Refer to Body Side Rear Upper Garnish Molding Replacement .
  2. Disconnect the electronic suspension control module electrical connectors.

    3. Object Number: 1371676 Size: SH
  3. Remove the electronic suspension control module from the bay board.

Installation Procedure

    Object Number: 1371676 Size: SH
  1. Install the electronic suspension control module to the bay board.
  2. Connect the electronic suspension control module electrical connectors.
  3. Install the right rear trim panel. Refer to Body Side Rear Upper Garnish Molding Replacement .