Removal Procedure
- Using a flat-bladed tool, carefully remove the finish covers from the luggage carrier side rails.
- Remove the bolts that retain the side rails to the roof panel.
- Remove the side rails from the roof panel.
- Remove the compression gaskets from the roof panel. Discard the gaskets.
Installation Procedure
- Install new compression gaskets to the roof panel.
Note: Install the new gaskets prior to installing the side rails.
- Position the side rails to the roof panel compression gaskets.
Caution: Refer to Fastener Caution in the Preface section.
- Install the bolts which retain the side rails to the roof panel.
Tighten
Tighten the bolts to 9 N·m (79 lb in).
- Install and secure the finish covers to the side rails.