Rear Seat Number 1 Back Replacement - Right Side for Cadillac SRX 2009

1. Remove the seat from the vehicle. Refer to Rear Seat Replacement.
2. Remove the right seat cushion. Refer to Rear Seat Cushion Replacement - Right Side.



3. Remove the pivot trim cover screws (1).
4. Remove the outer pivot covers.



5. Disconnect the seat release cables (2) from the seat adjuster.



6. Disconnect the J-channel retainers (1).
7. Remove the seat back retaining bolts (2).



8. Remove the seat back retaining bolt (1).
9. Remove the seat back from the seat adjuster.

1. Install the seat back on to the seat adjuster.

Caution: Refer to Fastener Caution in the Preface section.




2. Install the seat back retaining bolts (2).

Tighten
Tighten the bolts to 35 N·m (26 lb ft).




3. Install the seat back retaining bolt (1).

Tighten
Tighten the bolt to 35 N·m (26 lb ft).




4. Connect the seat release cables (2) to the seat adjuster.



5. Connect the J-channel retainers (1).



6. Install the pivot cover screws (1).

Tighten
Tighten the screws to 2 N·m (18 lb in).

7. Install the seat cushion. Refer to Rear Seat Cushion Replacement - Right Side.
8. Install the seat into the vehicle. Refer to Rear Seat Replacement.