GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1070494  Size: SH
  1. Remove the rear seat track covers (1) from the front of the seat.
  2. Raise the seat back to the upright position.

  3. Object Number: 1070450  Size: SH
  4. Remove the rear seat track cover (1) from the rear of the seat.

  5. Object Number: 1070403  Size: SH
  6. Remove the rear seat mounting bolts (1) from the rear of the seat.
  7. Disconnect the electrical connectors from the seat.
  8. Remove the seat from the vehicle.

Installation Procedure


    Object Number: 1070489  Size: SH
  1. Insert the hooks (1) at the front of the seat into the slots in the floor.
  2. Connect the electrical connector to the seat.
  3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1070403  Size: SH
  4. Install the rear seat mounting bolts (1).
  5. Tighten
    Tighten the mounting nuts to 45 N·m (33 lb ft).


    Object Number: 1070450  Size: SH
  6. Install the seat track cover (1) to the rear of the seat track.

  7. Object Number: 1070494  Size: SH
  8. Install the rear seat track covers to the front of the seat (1).
  9. Calibrate the seat. Refer to Memory Seat Calibration.