Instrument Panel Outer Air Outlet Upper Duct Replacement - Left Side Right Hand Drive

1. Remove the instrument panel (I/P) retainer. Refer to Instrument Panel Retainer Replacement.
2. Disconnect the wiring harness from the air duct.



3. Remove the screws (1) that retain the air duct.
4. Remove the left air duct (2), by unsnapping the duct from the HVAC module.

1. Install the left air duct (2), by pressing down until you hear the tabs engage on the HVAC module.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the air outlet duct screws (1).

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Connect the wiring harness to the air duct.
4. Install the I/P retainer. Refer to Instrument Panel Retainer Replacement.

Instrument Panel Outer Air Outlet Upper Duct Replacement - Left Side Left Hand Drive

1. Remove the instrument panel (I/P) retainer. Refer to Instrument Panel Retainer Replacement.



2. Remove the dash insulator (1).
3. Disconnect the wiring harness from the air duct.



4. Remove the screws (1) that retain the air duct.
5. Remove the left air duct (2), by unsnapping the duct from the HVAC module.

1. Install the left air duct (2), by pressing down until you hear the tabs engage on the HVAC module.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the air outlet duct screws (1).

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Connect the wiring harness to the air duct.



4. Install the dash insulator (1).
5. Install the I/P retainer. Refer to Instrument Panel Retainer Replacement.