GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Note: Gently pull downward at the front edge of the overhead console to disengage the fasteners.


    Object Number: 1234259  Size: SH
  1. Remove the overhead console (1).
  2. Disconnect the blower motor switch electrical connector.
  3. Remove the blower motor switch screws.
  4. Remove the blower motor switch from the dome lamp housing.

Installation Procedure

  1. Install the blower motor switch to the dome lamp housing.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the blower motor switch screws.
  4. Tighten
    Tighten the screws to 1 N·m (9 lb in).

  5. Connect the blower motor switch electrical connector.

  6. Object Number: 1234259  Size: SH
  7. Install the overhead console (1).