Removal Procedure
- Open the door.
- Remove the screw cover at the top of the garnish molding.
- Remove the screw from the garnish molding.
- Pull inward on the garnish molding (2) to release the top of the molding from the headliner (3).
- Pull inward at the center of the garnish molding to release the center part of the garnish molding.
- Remove the speaker. Refer to
Front Upper Speaker Replacement.
Installation Procedure
- Install the speaker. Refer to
Front Upper Speaker Replacement.
- Position the base of the garnish molding to the outside of the instrument panel pad.
- Position the molding to the windshield pillar, aligning the tabs to the retention clips on the windshield pillar.
- Push inward on the garnish molding (2) to secure the windshield pillar and headliner.
Caution: Refer to Fastener Caution in the Preface section.
- Install the fastener.
Tighten
Tighten the fastener to 2 N·m (18 lb in).
- Install the screw cover.