GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Rear Number 2 Folding Seat Replacement

Removal Procedure

    Object Number: 1070494 Size: SH
  1. Remove the rear seat track covers (1) from the front of the seat.
  2. Raise the seat back to the upright position.

    3. Object Number: 1070450 Size: SH
  3. Remove the rear seat track cover (1) from the rear of the seat.

    4. Object Number: 1070403 Size: SH
  4. Remove the rear seat mounting bolts (1) from the rear of the seat.
  5. Disconnect the electrical connectors from the seat.
  6. Remove the seat from the vehicle.

Installation Procedure

    Object Number: 1070489 Size: SH
  1. Insert the hooks (1) at the front of the seat into the slots in the floor.
  2. Connect the electrical connector to the seat.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1070403 Size: SH
  3. Install the rear seat mounting bolts (1).

    4. Tighten
    Tighten the mounting nuts to 45 N·m (33 lb ft).


    Object Number: 1070450 Size: SH
  4. Install the seat track cover (1) to the rear of the seat track.

    5. Object Number: 1070494 Size: SH
  5. Install the rear seat track covers to the front of the seat (1).
  6. Calibrate the seat. Refer to Memory Seat Calibration.