GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 STS 🢒 Engine 🢒 Engine Mechanical - 3.6L (LY7) 🢒 Fuel Injector Sight Shield Replacement

Removal Procedure

    Object Number: 1469395 Size: SH
  1. Remove the cross car brace, if necessary. Refer to Cross Vehicle Brace Replacement .
  2. Remove the oil fill cap.
  3. Disengage the cover/shield from the ball studs by pulling up firmly on the right rear and left front of the engine cover.
  4. Remove the engine cover/sight shield.
  5. Remove the front compartment sight shield, if necessary. Refer to Front Compartment Sight Shields Replacement .

Installation Procedure

    Object Number: 1469395 Size: SH
  1. Install the front compartment sight shield, if necessary. Refer to Front Compartment Sight Shields Replacement .
  2. Position the engine cover/sight shield over the intake manifold so the grommets are aligned with the ball studs.
  3. Press the engine cover/sight shield down firmly near the ball studs in order to install the engine cover/sight shield.
  4. Install the oil fill cap.
  5. Install the cross car brace, if necessary. Refer to Cross Vehicle Brace Replacement .