Engine Coolant Fan Bracket Replacement LH2

1. Remove the engine cooling fan. Refer to Fan Replacement .



2. Remove the fan bracket to crankshaft balancer bolts.
3. Remove the fan bracket to engine block bolts.
4. Remove the fan bracket from the vehicle.

1. Install the fan bracket to the engine.
2. Install but DO NOT tighten the fan bracket to engine block bolts.
3. If necessary, with the aid of an assistant, tap the engine ignition until the fan bracket to crankshaft balancer bolt holes are accessible.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the fan bracket to crankshaft balancer bolts.

Tighten

•	Tighten the fan bracket to crankshaft balancer bolts to 24 N·m (18 lb ft).

•	Tighten the fan bracket to engine block bolts to 24 N·m (18 lb ft).




5. Install the engine cooling fan. Refer to Fan Replacement .

Engine Coolant Fan Bracket Replacement LY7

1. Remove the engine cooling fan. Refer to Fan Replacement .
2. Remove the fan bracket to engine block bolts .
3. Remove the fan bracket from the vehicle.



4. Remove the adapter studs from the crankshaft balancer, if necessary.

Notice: Refer to Fastener Notice in the Preface section.




1. If previously removed, install the adapter studs to the crankshaft balancer .

Tighten
Tighten the engine cooling fan adapter studs to 22 N·m (16 lb ft).




2. Align the adapter assembly to the studs on the crankshaft.
3. Install the fan adapter to the engine.
4. Install the fan adapter to engine block bolts.

Tighten
Tighten the fan adapter to engine block bolts to 50 N·m (37 lb ft).

5. Install the engine cooling fan. Refer to Fan Replacement .