Schematic Reference: Exterior Lights Schematics

Connector End View Reference: Master Electrical Component List in Wiring Systems

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

Do the park lamps operate properly?

Go to Step 3

Go to Park Lamps Inoperative

1. Turn OFF the ignition.
2. Remove the inoperative cornering/side marker lamp bulb.
3. Connect a test lamp between the inoperative cornering/side marker lamp supply voltage circuit and the ground circuit of the inoperative cornering/side marker lamp.
4. Turn ON the ignition, with the engine OFF.
5. Turn ON the park lamps.

Does the test lamp illuminate?

Go to Step 5

Go to Step 4

Test the inoperative cornering/side marker lamp supply voltage circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 8

Go to Step 6

Inspect for poor connections at the inoperative cornering/side marker lamp bulb. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 8

Go to Step 7

Locate and repair an open or high resistance in the ground circuit of the inoperative cornering/side marker lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you complete the repair?

Go to Step 8

--

Replace the inoperative cornering/side marker lamp bulb. Refer to Front Side Marker Lamp Replacement .

Did you complete the replacement?

Go to Step 8

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2