GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 STS 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Electronic Suspension Control Module Replacement

Removal Procedure
  1. Remove the right rear trim panel.

    2. Object Number: 1530519 Size: SH
  2. Loosen the electronic suspension control (ESC) module nuts (3).
  3. Disconnect the ESC module electrical connector (1).
  4. Remove the ESC module (2).

Installation Procedure

    Object Number: 1530519 Size: SH
  1. Install the ESC module (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Connect the ESC module electrical connector (1).
  3. Tighten the ESC module nuts (3).

    4. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  4. Install the right rear trim panel.
  5. Refer to Control Module References for programming and setup information.