Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement .
2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
3. Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement .

1

Fender Bolts (Qty: 6)

Tighten
9 N·m (80 lb in)

2

Fender

Tip
Make sure fender is aligned correctly before tightening bolts back down.