GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 STS 🢒 Body 🢒 Lighting Systems 🢒 Headlamp Leveling Front Suspension Height Sensor Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 802719 Size: SH
  3. Disconnect the electrical connector (1).

    4. Object Number: 802716 Size: SH
  4. Disconnect the ball and socket (1) from the vehicle.
  5. Remove the bolt (2) from the sensor.
  6. Remove the sensor from the vehicle.

Installation Procedure

    Object Number: 802716 Size: SH
  1. Position the sensor to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolt (2) to secure the sensor to the vehicle.

    3. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  3. Install the ball and socket (1) to the sensor.

    4. Object Number: 802719 Size: SH
  4. Connect the electrical connector (1) to the sensor.
  5. Install the right tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.