Removal Procedure
- Remove the overhead console. Refer to
Roof Console Replacement
in Interior Trim.
- Remove the screws (1) securing the sunroof switch to the overhead console.
- Disconnect the electrical connector.
Installation Procedure
- Locate the sunroof switch to the overhead console.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (1) securing the sunroof switch to the overhead console.
Tighten
Tighten the screws (1) to 2 N·m (18 lb in).
- Connect the electrical connector.
- Install the overhead console. Refer to
Roof Console Replacement
in Interior Trim.