Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Headlamp Washer Nozzle Assembly Replacement

1

Fascia Assembly, Front Bumper

Refer to Front Bumper Fascia Replacement .

2

Screw, Headlamp Washer Nozzle

Tighten
2 N·m (18 lb in)

3

Hose Assembly, Headlamp Washer

4

Nozzle Assembly, Headlamp Washer

Tip

1. Squeeze the locking tabs on the headlamp washer nozzle assembly together to remove and replace from the fascia.
2. Pull the nozzle shaft out and lock in place with the washer nozzle locking tabs.
3. Use a small flat-bladed tool to release the trim cover from the nozzle.