GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the center floor console end panel. Refer to Center Console End Panel Replacement in Instrument Panel, Gages, and Console.

  2. Object Number: 1469657  Size: SH
  3. Remove the screws securing the speaker to the console end panel.
  4. Disconnect the electrical connector.

Installation Procedure


    Object Number: 1469657  Size: SH
  1. Connect the electrical connector.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screws securing the speaker to the end panel.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the center floor console end panel. Refer to Center Console End Panel Replacement in Instrument Panel, Gages, and Console.