Tools Required
J 44827 Transmission Cooler
Quick Disconnect
Removal Procedure
- Locate the transmission oil cooler (TOC)
quick connect fitting (1).
Important: Be sure that the lock tang on the release
tool is properly engaged.
- Install the J 44827
onto the TOC pipe.
- Slide the J 44827
toward the TOC quick connect fitting.
- Insert the J 44827
into the TOC quick connect fitting. The distance between the quick
connect fitting and J 44827
should be approximately 2.00 mm (0.080 in).
- Pull back on the TOC pipe to disengage the
pipe from the TOC quick connect fitting.
- Remove the J 44827
from the TOC pipe.
Installation Procedure
Important: Inspect the TOC quick connect fitting for
signs of wear or damage. Replace the components if necessary.
- Install the TOC pipe into the TOC quick connect fitting.
A distinct
snap should be heard or felt when assembling the TOC pipe to the quick connect fitting.
- To ensure the cooler line is properly installed, give the cooler pipe
a gentle pull.