Removal Procedure
- Remove
the windshield pillar garnish moldings. Refer to
Windshield Pillar Garnish Molding Replacement
.
- Insert a small flat-bladed tool into one end of the trim panel.
- Pry up in order to release the retaining clips.
- Disconnect the sunload sensor (3) electrical connector.
- Remove the trim panel.
Installation Procedure
- Connect
the sunload sensor (3) electrical connector.
- Locate the front tabs (1) of the trim panel to the instrument panel.
- Push the trim panel in to the instrument panel in order to secure the
retaining clips.
- Install the windshield pillar garnish moldings. Refer to
Windshield Pillar Garnish Molding Replacement
.