Caution: Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

Caution: Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury.

1. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
2. Remove the front section of the supercharger inlet duct assembly. Refer to Supercharger Inlet Duct Assembly Replacement .
3. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .



4. Place a shop towel under the engine compartment fuel line fittings (2,4) in order to capture any remaining fuel that may drain from the fuel line.
5. Remove the quick connect retainer clips from the fittings.
6. Disconnect the engine compartment fuel line fitting (2) from the chassis fuel feed pipe. Refer to Metal Collar Quick Connect Fitting Service .
7. Disconnect the engine compartment fuel line fitting (4) from the fuel rail . Refer to Metal Collar Quick Connect Fitting Service .
8. Remove the engine compartment fuel line from the vehicle.

1. Position the engine compartment fuel line to the vehicle.



2. Connect the engine compartment fuel line fitting (4) to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
3. Connect the engine compartment fuel line fitting (2) to the chassis fuel feed pipe. Refer to Metal Collar Quick Connect Fitting Service .
4. Install the quick connect retainer clips to the fuel line fittings (2,4).
5. Install the front section of the supercharger inlet duct assembly. Refer to Supercharger Inlet Duct Assembly Replacement .
6. Install the fuel tank fill cap.
7. Check the fuel system for leaks.
8. Install the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .