Scan Tool Output Controls. Cadillac STS 2007

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2007 🢒 STS 🢒 Engine 🢒 Engine Electrical 🢒 Scan Tool Output Controls

Table 1:	Engine Control Module (ECM) 3.6L (LY7)
Table 2:	Engine Control Module (ECM) 4.4L (LC3)
Table 3:	Engine Control Module (ECM) 4.6L (LH2)

Engine Control Module (ECM) 3.6L (LY7)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Engine Output Controls	GEN L-Terminal	The engine control module (ECM) commands the generator OFF by removing the 5-volt reference signal from the L terminal of the voltage regulator when you select OFF. The generator will then stop generating an output voltage.
Engine Output Controls	Starter Relay Control	The ECM grounds the starter relay control circuit when ON is selected. When OFF is selected, ground is removed from the circuit

Engine Control Module (ECM) 4.4L (LC3)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Engine Output Controls	GEN L-Terminal	The engine control module (ECM) commands the generator OFF by removing the 5-volt reference signal from the L terminal of the voltage regulator when you select OFF. The generator will then stop generating an output voltage.

Engine Control Module (ECM) 4.6L (LH2)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Engine Output Controls	GEN L-Terminal	The engine control module (ECM) commands the generator OFF by removing the 5-volt reference signal from the L terminal of the voltage regulator when you select OFF. The generator will then stop generating an output voltage.