Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the left exhaust manifold. Refer to
Exhaust Manifold Replacement - Left Side
.
- Install a screw jack with a block of wood under the oil pan for support.
- Remove the upper engine mount retaining nut.
Important: Ensure not to distort or bend the engine mount heat shield.
- Remove the left engine mount bracket retaining bolts.
- Remove the left engine mount bracket.
Installation Procedure
- Install the left engine mount brackets.
Notice: Refer to Fastener Notice in the Preface section.
- Install the left engine mount bracket retaining bolts.
Tighten
Tighten the bolts to 60 N·m (44 lb ft).
- Install the upper engine mount retaining nut.
Tighten
Tighten the nut to 80 N·m (59 lb ft).
- Remove the screw jack.
- Install the left exhaust manifold. Refer to
Exhaust Manifold Replacement - Left Side
.
- Lower the vehicle.